|
„TwinPlus Trio”
- 4 joints, 5 zones - ergonomic and protects the mattress
- synchro-drive: Neck and back zone are moving synchronously
- completely encapsulated mechanical fittings
- mains supply 230 V (100 V / 120 V /240 V in preparation)
- low voltage (24 V) when operated only
- two dc-motors, maintenance free
- mechanical emergency lowering (no battery necessary!)
- height of strand (mm): 89,5
- length in mm: 1950
- rig for 56 standard support elements / caps
- double caps, can be assembled supplementary
- position of caps can be inside or covering bar
- slats can be assembled easily
- width: flexible, depending on the lengths of the square tubes (drive axis)
- blocking force 9.000 N
- pulling force 2 x 4.500 N
- color of strands: basalt grey, similar like RAL 7012
- Control: basalt grey, similar like RAL 7012, user-friendly
- manufactured according to VDE (Association of German Electricians), protection class II
- mains power cut off
- LGA (State Office for Trading) certificate in preparation
Electrical data
The technique is serially available with following input voltage:
| 230 V / 50 Hz |
Standard |
| 240 V / 50 Hz |
(in preparation)d |
| 100 V / 50/60 Hz |
(in preparation) |
| 120 V / 60 Hz |
(in preparation) |
For all voltages the following applies:
| input power |
130 W |
| output voltage |
22,5 V AC |
| power output |
70 W |
| intermittent duty |
2 min. / 18 min. |
| number of motors |
2 |
| motor construction |
24 V DC direct current (permanent magnet) |
|
